No products were found matching your selection.

Other Related Products

  • Cross Linked Polyethylene Foam Tape

    • Material: Cross-linked PE foam carrier
    • Foam Type: IXPE foam with fine closed-cell structure
    • Thickness: 0.5 mm-10 mm typical options
    • Density: 25-100 kg/m3 for different compression needs
    • Color: Black, white, grey
    • Use: Gasket, spacer, sealing, cushioning, die-cut parts
    Read moreDone

  • Double Sided Gasket Tape

    • Common thickness: 0.2 mm-5.0 mm
    • Color: black, white, gray, or custom
    • Carrier: PE foam, PU foam, EPDM, neoprene, or rubber
    • Adhesive: acrylic PSA, rubber PSA, or differential PSA
    • Liner: paper, PET, glassine, coated paper, or dual liner
    • Supply form: rolls, sheets, kiss-cut parts, or die-cut gaskets
    Read moreDone

  • Neoprene Foam Tape Single Sided

    • Material: Closed-cell neoprene foam
    • Color: Black as standard
    • Adhesive: Rubber PSA or acrylic PSA
    • Liner: Kraft paper or PE-coated release liner
    • Thickness: 1 mm-20 mm common range
    • Format: Slit rolls, die-cut gaskets, kiss-cut parts
    Read moreDone

  • Artificial Grass Tape Solutions for Seaming, Joining and Perimeter Fixing

    Double sided tape for artificial grass can support turf-to-turf seaming, patch repair, light perimeter support and temporary turf-to-floor fixing, but these jobs create different bond lines. Selection should start with the actual turf backing, substrate, exposure, traffic and removal requirement rather than hand tack alone. Main risks include visible joints, edge lift, contaminated or damp contact surfaces, movement before adequate contact develops and adhesive transfer during removal. Where the surface, coating or outdoor condition is uncertain, a representative sample seam should be tested before full use.

    Read moreDone

  • Double Coated Carpet Tape

    • Common sizes: 24 mm, 36 mm, 48 mm, 72 mm, 100 mm; slit widths available
    • Color: White tape with blue PE liner or siliconized paper liner
    • Structure: Carrier coated with pressure-sensitive adhesive on both sides
    • Carrier options: Cloth, polyester fabric, OPP film, or PET film
    • Adhesive options: Natural rubber, synthetic rubber, removable or stronger holding grade
    • Applications:Commercial carpet, hotel, office, exhibition, and event flooring
    Read moreDone

  • Double Sided Foam Tape For Automotive Decorative Trim Strip

    • Common thickness: 0.4 mm, 0.6 mm, 0.8 mm, 1.0 mm, 1.2 mm, 1.5 mm
    • Color: black, gray, white, or custom foam color
    • Foam carrier: closed-cell PE foam or acrylic foam option
    • Adhesive: automotive-grade acrylic pressure-sensitive adhesive
    • Liner: red PE film, white paper, or easy-release film liner
    • Typical tolerance: +/-05 mm thickness, +/-0.5 mm slitting reference
    Read moreDone

  • Heat Iron Carpet Joining Tape

    • Width: 90 mm / 100 mm
    • Length: 20 m / 50 m
    • Color: Yellow, white, gold
    • Adhesive: Heat activated hot melt
    • Placement: Below carpet joint
    • Use: Heat iron joining
    Read moreDone

  • Nano PU Gel Tape

    • Material: Transparent PU gel adhesive
    • Color: Clear, high transparency
    • Thickness: 0.5 mm, 1.0 mm, 2.0 mm, 3.0 mm
    • Format: Roll, pad, strip, gasket
    • Width: 10 mm-500 mm or slit to size
    • Processing: Slitting, die cutting, kiss cutting
    Read moreDone

  • Seaming Tape For Artificial Grass

    • Common Width: 10 cm, 15 cm, 20 cm
    • Common Length: 5 m, 10 m, 15 m, 20 m, 50 m
    • Color: Green, black, white liner, custom available
    • Backing Material: Non-woven fabric or PP cloth
    • Adhesive Type: Hot melt pressure-sensitive adhesive
    • Use Area: Backing-side artificial grass seam connection
    Read moreDone