No products were found matching your selection.
Other Related Products
-
Double sided acrylic tape shear strength describes resistance to a sustained load acting parallel to bonded surfaces. The value is meaningful only when bonded area, load, substrate, temperature, application pressure, dwell time, and failure criterion are stated. It explains static shear holding, how it differs from peel and tack, and when results are not comparable. Typical values and reference ranges should be confirmed by sample testing.
-
- Common sizes: 3 mm-1240 mm width, roll or slit roll
- Color: Translucent white or light yellow
- Carrier: Thin non-woven tissue paper
- Liner: White release paper or yellow glassine liner
- Thickness: 70 um, 80 um, 90 um, 100 um
- Use: Paperboard, labels, display cards, gift boxes
-
- Width: 90 mm / 100 mm
- Length: 20 m / 50 m
- Color: Yellow, white, gold
- Adhesive: Heat activated hot melt
- Placement: Below carpet joint
- Use: Heat iron joining
-
Double sided tape for artificial grass can support turf-to-turf seaming, patch repair, light perimeter support and temporary turf-to-floor fixing, but these jobs create different bond lines. Selection should start with the actual turf backing, substrate, exposure, traffic and removal requirement rather than hand tack alone. Main risks include visible joints, edge lift, contaminated or damp contact surfaces, movement before adequate contact develops and adhesive transfer during removal. Where the surface, coating or outdoor condition is uncertain, a representative sample seam should be tested before full use.
-
- Common Width: 10 cm, 15 cm, 20 cm
- Common Length: 5 m, 10 m, 15 m, 20 m, 50 m
- Color: Green, black, white liner, custom available
- Backing Material: Non-woven fabric or PP cloth
- Adhesive Type: Hot melt pressure-sensitive adhesive
- Use Area: Backing-side artificial grass seam connection
-
- Material: Closed-cell PE foam carrier
- Thickness: 0.5 mm-3.0 mm typical
- Density: 45-100 kg/m3 typical
- Color: White, black, gray optional
- Adhesive: Rubber, acrylic, solvent acrylic PSA
- Processing: Slitting, die-cutting, warm pressing, laminating
-
- Material: washable PU gel with double-sided nano adhesive contact
- Thickness: 1mm for low-profile corners, 2mm for stronger contact
- Shapes: triangle, L-shape, V-shape, round, strip, or OEM cut pieces
- Common sizes: 100 x 100 mm triangle, 130 x 25 mm strip, or custom size
- Colors: clear, black, white, or matched to private label packing
- Packing: 4pcs/set, 8pcs/set, 12pcs/set, poly bag, card, or box
-
Closed cell EPDM foam properties are commonly compared through compression deflection, compression set, density, tensile strength, elongation, water absorption, and resistance to temperature, ozone, and weather. These values help screen grades for sealing, gasketing, cushioning, and adhesive-backed constructions. Read results with the stated test method and specimen condition, then confirm suitability on the intended surface, compression level, adhesive construction, and service environment.
