No products were found matching your selection.

Other Related Products

  • Double Sided Acrylic Tape Shear Strength & Technical Test Data

    Double sided acrylic tape shear strength describes resistance to a sustained load acting parallel to bonded surfaces. The value is meaningful only when bonded area, load, substrate, temperature, application pressure, dwell time, and failure criterion are stated. It explains static shear holding, how it differs from peel and tack, and when results are not comparable. Typical values and reference ranges should be confirmed by sample testing.

    Read moreDone

  • Heat Tape For Grills

    • Width: 10 mm-50 mm
    • Thickness: 1 mm-5 mm
    • Color: Black, grey, custom
    • Backing: Heat resistant fiber composite
    • Adhesive: High temperature self adhesive backing
    • Use Area: Lid edge, door gap, window edge
    Read moreDone

  • Double Face Tape For Clothing

    • Standard widths: 10mm, 15mm, 20mm, 25mm
    • Color: Transparent
    • Carrier material: Thin PET film (25 u)
    • Adhesive type: Skin-safe acrylic layer, 80 u
    • Application: Temporary fabric-to-fabric or fabric-to-skin fixing
    • Peel adhesion: 0.8–1.2 N/cm (fabric-to-fabric), 0.5–0.9 N/cm (fabric-to-skin)
    Read moreDone

  • EPDM Self Adhesive Tape

    • Common size: 2-20 mm thickness, custom slit width
    • Color: Black EPDM foam with protected adhesive side
    • Material: Closed-cell EPDM foam carrier
    • Adhesive: One-sided pressure sensitive backing
    • Liner: Peel-off paper or film release liner
    • Use: Sealing, cushioning, gap filling
    Read moreDone

  • Double Sided Foam Tape For Automotive Decorative Trim Strip

    • Common thickness: 0.4 mm, 0.6 mm, 0.8 mm, 1.0 mm, 1.2 mm, 1.5 mm
    • Color: black, gray, white, or custom foam color
    • Foam carrier: closed-cell PE foam or acrylic foam option
    • Adhesive: automotive-grade acrylic pressure-sensitive adhesive
    • Liner: red PE film, white paper, or easy-release film liner
    • Typical tolerance: +/-05 mm thickness, +/-0.5 mm slitting reference
    Read moreDone

  • Polyether Urethane Foam Tape

    • Common thickness: 1/8 inch, 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch, 1 inch
    • Color: gray, charcoal gray, or custom dark foam appearance
    • Material: open-cell polyether urethane foam
    • Adhesive option: rubber PSA, acrylic PSA, single sided, double sided, or plain foam
    • Supply form: slit rolls, sheets, kiss-cut pads, and die-cut parts
    • Main use: cushioning, gasketing, sound damping, light blocking, and vibration control
    Read moreDone

  • Neoprene Foam Tape Single Sided

    • Material: Closed-cell neoprene foam
    • Color: Black as standard
    • Adhesive: Rubber PSA or acrylic PSA
    • Liner: Kraft paper or PE-coated release liner
    • Thickness: 1 mm-20 mm common range
    • Format: Slit rolls, die-cut gaskets, kiss-cut parts
    Read moreDone

  • Double Coated Carpet Tape

    • Common sizes: 24 mm, 36 mm, 48 mm, 72 mm, 100 mm; slit widths available
    • Color: White tape with blue PE liner or siliconized paper liner
    • Structure: Carrier coated with pressure-sensitive adhesive on both sides
    • Carrier options: Cloth, polyester fabric, OPP film, or PET film
    • Adhesive options: Natural rubber, synthetic rubber, removable or stronger holding grade
    • Applications:Commercial carpet, hotel, office, exhibition, and event flooring
    Read moreDone

  • Foam Bonding PSA Tapes

    • Common Size: jumbo rolls, slit rolls, die-cut pads, strips, and laminated sheets.
    • Color: white, black, grey, or custom foam color.
    • Material: PE, EVA, IXPE, or PU foam carrier.
    • Adhesive: acrylic, rubber, or hot melt PSA on both sides.
    • Thickness: 0.3 mm to 3.0 mm typical range.
    • Use: panel bonding, nameplate mounting, molding fixing, and converter processing.
    Read moreDone