No products were found matching your selection.

Other Related Products

  • Double Sided Gasket Tape

    • Common thickness: 0.2 mm-5.0 mm
    • Color: black, white, gray, or custom
    • Carrier: PE foam, PU foam, EPDM, neoprene, or rubber
    • Adhesive: acrylic PSA, rubber PSA, or differential PSA
    • Liner: paper, PET, glassine, coated paper, or dual liner
    • Supply form: rolls, sheets, kiss-cut parts, or die-cut gaskets
    Read moreDone

  • Artificial Grass Tape Solutions for Seaming, Joining and Perimeter Fixing

    Double sided tape for artificial grass can support turf-to-turf seaming, patch repair, light perimeter support and temporary turf-to-floor fixing, but these jobs create different bond lines. Selection should start with the actual turf backing, substrate, exposure, traffic and removal requirement rather than hand tack alone. Main risks include visible joints, edge lift, contaminated or damp contact surfaces, movement before adequate contact develops and adhesive transfer during removal. Where the surface, coating or outdoor condition is uncertain, a representative sample seam should be tested before full use.

    Read moreDone

  • Double Sided PE Foam Tape Jumbo Roll

    • Material: Closed-cell PE foam carrier
    • Thickness: 0.5 mm-3.0 mm typical
    • Density: 45-100 kg/m3 typical
    • Color: White, black, gray optional
    • Adhesive: Rubber, acrylic, solvent acrylic PSA
    • Processing: Slitting, die-cutting, warm pressing, laminating
    Read moreDone

  • Neoprene Foam Tape Single Sided

    • Material: Closed-cell neoprene foam
    • Color: Black as standard
    • Adhesive: Rubber PSA or acrylic PSA
    • Liner: Kraft paper or PE-coated release liner
    • Thickness: 1 mm-20 mm common range
    • Format: Slit rolls, die-cut gaskets, kiss-cut parts
    Read moreDone

  • Closed Cell EPDM Foam Properties and Technical Specifications

    Closed cell EPDM foam properties are commonly compared through compression deflection, compression set, density, tensile strength, elongation, water absorption, and resistance to temperature, ozone, and weather. These values help screen grades for sealing, gasketing, cushioning, and adhesive-backed constructions. Read results with the stated test method and specimen condition, then confirm suitability on the intended surface, compression level, adhesive construction, and service environment.

    Read moreDone

  • EVA Foam Sealing Tape

    • Material: Closed-cell EVA foam
    • Adhesive: Acrylic, rubber, or hot melt adhesive
    • Color: Black, white, gray, or custom
    • Thickness: 1 mm-15 mm typical range
    • Width: 5 mm-1000 mm slit roll width
    • Form: Rolls, strips, pads, die-cut gaskets
    Read moreDone

  • Cross Linked Polyethylene Foam Tape

    • Material: Cross-linked PE foam carrier
    • Foam Type: IXPE foam with fine closed-cell structure
    • Thickness: 0.5 mm-10 mm typical options
    • Density: 25-100 kg/m3 for different compression needs
    • Color: Black, white, grey
    • Use: Gasket, spacer, sealing, cushioning, die-cut parts
    Read moreDone

  • NBR Insulation Foam Tape

    • Material: NBR/PVC flexible elastomeric foam
    • Foam Structure: Closed-cell
    • Color: Black
    • Common Thickness: 3 mm, 5 mm, 6 mm
    • Common Width: 25 mm, 50 mm, 75 mm
    • Adhesive: Pressure-sensitive adhesive with release liner
    Read moreDone

  • Seaming Tape For Artificial Grass

    • Common Width: 10 cm, 15 cm, 20 cm
    • Common Length: 5 m, 10 m, 15 m, 20 m, 50 m
    • Color: Green, black, white liner, custom available
    • Backing Material: Non-woven fabric or PP cloth
    • Adhesive Type: Hot melt pressure-sensitive adhesive
    • Use Area: Backing-side artificial grass seam connection
    Read moreDone