No products were found matching your selection.

Other Related Products

  • Polyether Urethane Foam Tape

    • Common thickness: 1/8 inch, 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch, 1 inch
    • Color: gray, charcoal gray, or custom dark foam appearance
    • Material: open-cell polyether urethane foam
    • Adhesive option: rubber PSA, acrylic PSA, single sided, double sided, or plain foam
    • Supply form: slit rolls, sheets, kiss-cut pads, and die-cut parts
    • Main use: cushioning, gasketing, sound damping, light blocking, and vibration control
    Read moreDone

  • Seaming Tape For Artificial Grass

    • Common Width: 10 cm, 15 cm, 20 cm
    • Common Length: 5 m, 10 m, 15 m, 20 m, 50 m
    • Color: Green, black, white liner, custom available
    • Backing Material: Non-woven fabric or PP cloth
    • Adhesive Type: Hot melt pressure-sensitive adhesive
    • Use Area: Backing-side artificial grass seam connection
    Read moreDone

  • EVA Foam Sealing Tape

    • Material: Closed-cell EVA foam
    • Adhesive: Acrylic, rubber, or hot melt adhesive
    • Color: Black, white, gray, or custom
    • Thickness: 1 mm-15 mm typical range
    • Width: 5 mm-1000 mm slit roll width
    • Form: Rolls, strips, pads, die-cut gaskets
    Read moreDone

  • Double Sided Acrylic Tape Shear Strength & Technical Test Data

    Double sided acrylic tape shear strength describes resistance to a sustained load acting parallel to bonded surfaces. The value is meaningful only when bonded area, load, substrate, temperature, application pressure, dwell time, and failure criterion are stated. It explains static shear holding, how it differs from peel and tack, and when results are not comparable. Typical values and reference ranges should be confirmed by sample testing.

    Read moreDone

  • Double Sided PET Polyester Acrylic Adhesive Tape

    • Material: PET/polyester film carrier with acrylic adhesive on both sides
    • Color: Clear, translucent, black, or custom tinted film
    • Thickness: 0.03 mm to 0.20 mm typical range
    • Liner: Glassine paper, PE-coated paper, PET film, or double liner
    • Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
    • Use: Nameplates, panels, overlays, membrane switches, and electronics
    Read moreDone

  • Double Sided Adhesive Tissue Tape

    • Common sizes: 3 mm-1240 mm width, roll or slit roll
    • Color: Translucent white or light yellow
    • Carrier: Thin non-woven tissue paper
    • Liner: White release paper or yellow glassine liner
    • Thickness: 70 um, 80 um, 90 um, 100 um
    • Use: Paperboard, labels, display cards, gift boxes
    Read moreDone

  • NBR Insulation Foam Tape

    • Material: NBR/PVC flexible elastomeric foam
    • Foam Structure: Closed-cell
    • Color: Black
    • Common Thickness: 3 mm, 5 mm, 6 mm
    • Common Width: 25 mm, 50 mm, 75 mm
    • Adhesive: Pressure-sensitive adhesive with release liner
    Read moreDone

  • EPDM Self Adhesive Tape

    • Common size: 2-20 mm thickness, custom slit width
    • Color: Black EPDM foam with protected adhesive side
    • Material: Closed-cell EPDM foam carrier
    • Adhesive: One-sided pressure sensitive backing
    • Liner: Peel-off paper or film release liner
    • Use: Sealing, cushioning, gap filling
    Read moreDone

  • Foam Bonding PSA Tapes

    • Common Size: jumbo rolls, slit rolls, die-cut pads, strips, and laminated sheets.
    • Color: white, black, grey, or custom foam color.
    • Material: PE, EVA, IXPE, or PU foam carrier.
    • Adhesive: acrylic, rubber, or hot melt PSA on both sides.
    • Thickness: 0.3 mm to 3.0 mm typical range.
    • Use: panel bonding, nameplate mounting, molding fixing, and converter processing.
    Read moreDone