No products were found matching your selection.

Other Related Products

  • NBR Insulation Foam Tape

    • Material: NBR/PVC flexible elastomeric foam
    • Foam Structure: Closed-cell
    • Color: Black
    • Common Thickness: 3 mm, 5 mm, 6 mm
    • Common Width: 25 mm, 50 mm, 75 mm
    • Adhesive: Pressure-sensitive adhesive with release liner
    Read moreDone

  • Heat Tape For Grills

    • Width: 10 mm-50 mm
    • Thickness: 1 mm-5 mm
    • Color: Black, grey, custom
    • Backing: Heat resistant fiber composite
    • Adhesive: High temperature self adhesive backing
    • Use Area: Lid edge, door gap, window edge
    Read moreDone

  • Double Sided Tissue Tape Jumbo Roll

    • Common size: 1020mm / 1240mm usable width, 500m-1200m length
    • Color: White or light yellow tape, white/yellow release paper
    • Carrier: Tissue paper or non-woven tissue carrier
    • Adhesive: Hot melt, water-based acrylic, or solvent acrylic
    • Liner: Glassine, white release paper, or PCK liner
    • Use: Die cutting, labels, nameplates, foam, paperboard bonding
    Read moreDone

  • Double Sided Acrylic Tape Shear Strength & Technical Test Data

    Double sided acrylic tape shear strength describes resistance to a sustained load acting parallel to bonded surfaces. The value is meaningful only when bonded area, load, substrate, temperature, application pressure, dwell time, and failure criterion are stated. It explains static shear holding, how it differs from peel and tack, and when results are not comparable. Typical values and reference ranges should be confirmed by sample testing.

    Read moreDone

  • Cross Linked Polyethylene Foam Tape

    • Material: Cross-linked PE foam carrier
    • Foam Type: IXPE foam with fine closed-cell structure
    • Thickness: 0.5 mm-10 mm typical options
    • Density: 25-100 kg/m3 for different compression needs
    • Color: Black, white, grey
    • Use: Gasket, spacer, sealing, cushioning, die-cut parts
    Read moreDone

  • Neoprene Foam Tape Single Sided

    • Material: Closed-cell neoprene foam
    • Color: Black as standard
    • Adhesive: Rubber PSA or acrylic PSA
    • Liner: Kraft paper or PE-coated release liner
    • Thickness: 1 mm-20 mm common range
    • Format: Slit rolls, die-cut gaskets, kiss-cut parts
    Read moreDone

  • Artificial Grass Tape Solutions for Seaming, Joining and Perimeter Fixing

    Double sided tape for artificial grass can support turf-to-turf seaming, patch repair, light perimeter support and temporary turf-to-floor fixing, but these jobs create different bond lines. Selection should start with the actual turf backing, substrate, exposure, traffic and removal requirement rather than hand tack alone. Main risks include visible joints, edge lift, contaminated or damp contact surfaces, movement before adequate contact develops and adhesive transfer during removal. Where the surface, coating or outdoor condition is uncertain, a representative sample seam should be tested before full use.

    Read moreDone

  • Double Sided Gasket Tape

    • Common thickness: 0.2 mm-5.0 mm
    • Color: black, white, gray, or custom
    • Carrier: PE foam, PU foam, EPDM, neoprene, or rubber
    • Adhesive: acrylic PSA, rubber PSA, or differential PSA
    • Liner: paper, PET, glassine, coated paper, or dual liner
    • Supply form: rolls, sheets, kiss-cut parts, or die-cut gaskets
    Read moreDone

  • Nano PU Gel Tape

    • Material: Transparent PU gel adhesive
    • Color: Clear, high transparency
    • Thickness: 0.5 mm, 1.0 mm, 2.0 mm, 3.0 mm
    • Format: Roll, pad, strip, gasket
    • Width: 10 mm-500 mm or slit to size
    • Processing: Slitting, die cutting, kiss cutting
    Read moreDone