No products were found matching your selection.
Other Related Products
-

Double sided tape for artificial grass can support turf-to-turf seaming, patch repair, light perimeter support and temporary turf-to-floor fixing, but these jobs create different bond lines. Selection should start with the actual turf backing, substrate, exposure, traffic and removal requirement rather than hand tack alone. Main risks include visible joints, edge lift, contaminated or damp contact surfaces, movement before adequate contact develops and adhesive transfer during removal. Where the surface, coating or outdoor condition is uncertain, a representative sample seam should be tested before full use.
-


- Material: Transparent PU gel adhesive
- Color: Clear, high transparency
- Thickness: 0.5 mm, 1.0 mm, 2.0 mm, 3.0 mm
- Format: Roll, pad, strip, gasket
- Width: 10 mm-500 mm or slit to size
- Processing: Slitting, die cutting, kiss cutting
-


- Material: Cross-linked PE foam carrier
- Foam Type: IXPE foam with fine closed-cell structure
- Thickness: 0.5 mm-10 mm typical options
- Density: 25-100 kg/m3 for different compression needs
- Color: Black, white, grey
- Use: Gasket, spacer, sealing, cushioning, die-cut parts
-


- Material: NBR/PVC flexible elastomeric foam
- Foam Structure: Closed-cell
- Color: Black
- Common Thickness: 3 mm, 5 mm, 6 mm
- Common Width: 25 mm, 50 mm, 75 mm
- Adhesive: Pressure-sensitive adhesive with release liner
-


- Common sizes: 24 mm, 36 mm, 48 mm, 72 mm, 100 mm; slit widths available
- Color: White tape with blue PE liner or siliconized paper liner
- Structure: Carrier coated with pressure-sensitive adhesive on both sides
- Carrier options: Cloth, polyester fabric, OPP film, or PET film
- Adhesive options: Natural rubber, synthetic rubber, removable or stronger holding grade
- Applications:Commercial carpet, hotel, office, exhibition, and event flooring
-


- Material: PET/polyester film carrier with acrylic adhesive on both sides
- Color: Clear, translucent, black, or custom tinted film
- Thickness: 0.03 mm to 0.20 mm typical range
- Liner: Glassine paper, PE-coated paper, PET film, or double liner
- Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
- Use: Nameplates, panels, overlays, membrane switches, and electronics
-


- Common Width: 10 cm, 15 cm, 20 cm
- Common Length: 5 m, 10 m, 15 m, 20 m, 50 m
- Color: Green, black, white liner, custom available
- Backing Material: Non-woven fabric or PP cloth
- Adhesive Type: Hot melt pressure-sensitive adhesive
- Use Area: Backing-side artificial grass seam connection
-


- Common Size: jumbo rolls, slit rolls, die-cut pads, strips, and laminated sheets.
- Color: white, black, grey, or custom foam color.
- Material: PE, EVA, IXPE, or PU foam carrier.
- Adhesive: acrylic, rubber, or hot melt PSA on both sides.
- Thickness: 0.3 mm to 3.0 mm typical range.
- Use: panel bonding, nameplate mounting, molding fixing, and converter processing.
-


- Material: Closed-cell EVA foam
- Adhesive: Acrylic, rubber, or hot melt adhesive
- Color: Black, white, gray, or custom
- Thickness: 1 mm-15 mm typical range
- Width: 5 mm-1000 mm slit roll width
- Form: Rolls, strips, pads, die-cut gaskets