No products were found matching your selection.
Other Related Products
-


- Base: High-quality SBR foam laminated with adhesive.
- Uses: Commonly used for soundproofing, cushioning, gap filling, and sealing.
- Adhesive options: Acrylic / rubber-based / hot melt.
- Color choices: Black, white, or gray.
- Dimensions: Thickness from 1 mm to 10 mm, custom width and length.
- Type: Available in single-sided or double-sided versions.
-


- Backing: Made from closed-cell neoprene rubber compound.
- Adhesive: One side or Two side has strong acrylic adhesive for firm bonding.
- Width: Available in a very large range of widths is from 6 mm to 48 mm.
- Length: All of our standard sizes is from 5 m to 25 m.
- Thickness: From 2 mm to 19 mm.
-


- Material: NBR/PVC flexible elastomeric foam
- Foam Structure: Closed-cell
- Color: Black
- Common Thickness: 3 mm, 5 mm, 6 mm
- Common Width: 25 mm, 50 mm, 75 mm
- Adhesive: Pressure-sensitive adhesive with release liner
-


- Material: Closed-cell EVA foam
- Adhesive: Acrylic, rubber, or hot melt adhesive
- Color: Black, white, gray, or custom
- Thickness: 1 mm-15 mm typical range
- Width: 5 mm-1000 mm slit roll width
- Form: Rolls, strips, pads, die-cut gaskets
-


- Common sizes: 24 mm, 36 mm, 48 mm, 72 mm, 100 mm; slit widths available
- Color: White tape with blue PE liner or siliconized paper liner
- Structure: Carrier coated with pressure-sensitive adhesive on both sides
- Carrier options: Cloth, polyester fabric, OPP film, or PET film
- Adhesive options: Natural rubber, synthetic rubber, removable or stronger holding grade
- Applications:Commercial carpet, hotel, office, exhibition, and event flooring
-


- Width: 90 mm / 100 mm
- Length: 20 m / 50 m
- Color: Yellow, white, gold
- Adhesive: Heat activated hot melt
- Placement: Below carpet joint
- Use: Heat iron joining
-


- Material: Cellular EPDM foam tape with high tack pressure sensitive acrylic adhesive.
- Width: 6 mm, 10 mm, 15 mm, 25 mm;
- Thickness: 1 mm, 2 mm, 4 mm, 6 mm, 10 mm;
- Length: 1 roll with 10 m.
- Color: Black or Gray
-


- Material: PET/polyester film carrier with acrylic adhesive on both sides
- Color: Clear, translucent, black, or custom tinted film
- Thickness: 0.03 mm to 0.20 mm typical range
- Liner: Glassine paper, PE-coated paper, PET film, or double liner
- Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
- Use: Nameplates, panels, overlays, membrane switches, and electronics