No products were found matching your selection.
Other Related Products
-
- Backing: Made from closed-cell neoprene rubber compound.
- Adhesive: One side or Two side has strong acrylic adhesive for firm bonding.
- Width: Available in a very large range of widths is from 6 mm to 48 mm.
- Length: All of our standard sizes is from 5 m to 25 m.
- Thickness: From 2 mm to 19 mm.
-
- Material: Rubber gasket widely used where many types of bases, such as EPDM, PTFE, Neoprene, PVC, Silicone.
- Acids: Acrylic or Silicone Pressure Sensitive Adhesive.
- Type: Adhesive coating on 1 or 2 sides.
- Width Options: 15 mm, 20 mm, 25 mm.
- Length Options: 10 meters.
- Available thickness: 1 mm, 3 mm, 5 mm, 6 mm or custom.
-
- Width: 90 mm / 100 mm
- Length: 20 m / 50 m
- Color: Yellow, white, gold
- Adhesive: Heat activated hot melt
- Placement: Below carpet joint
- Use: Heat iron joining
-
- Material: PET/polyester film carrier with acrylic adhesive on both sides
- Color: Clear, translucent, black, or custom tinted film
- Thickness: 0.03 mm to 0.20 mm typical range
- Liner: Glassine paper, PE-coated paper, PET film, or double liner
- Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
- Use: Nameplates, panels, overlays, membrane switches, and electronics
-
- Material: Closed-cell EVA foam
- Adhesive: Acrylic, rubber, or hot melt adhesive
- Color: Black, white, gray, or custom
- Thickness: 1 mm-15 mm typical range
- Width: 5 mm-1000 mm slit roll width
- Form: Rolls, strips, pads, die-cut gaskets
-
- Common sizes: 3 mm-1240 mm width, slit rolls or die-cut parts
- Color: Clear adhesive with red PE release liner
- Material: Acrylic PSA with PET carrier or selected film structure
- Thickness options: 0.10 mm-0.50 mm typical range
- Surface fit: Glass, metal, plastic, painted panels
- Use: Industrial bonding, signage, panels, and assembly
-
- Common sizes: 24 mm, 36 mm, 48 mm, 72 mm, 100 mm; slit widths available
- Color: White tape with blue PE liner or siliconized paper liner
- Structure: Carrier coated with pressure-sensitive adhesive on both sides
- Carrier options: Cloth, polyester fabric, OPP film, or PET film
- Adhesive options: Natural rubber, synthetic rubber, removable or stronger holding grade
- Applications:Commercial carpet, hotel, office, exhibition, and event flooring
-
- Base: High-quality SBR foam laminated with adhesive.
- Uses: Commonly used for soundproofing, cushioning, gap filling, and sealing.
- Adhesive options: Acrylic / rubber-based / hot melt.
- Color choices: Black, white, or gray.
- Dimensions: Thickness from 1 mm to 10 mm, custom width and length.
- Type: Available in single-sided or double-sided versions.
-
- Material: Cross-linked PE foam carrier
- Foam Type: IXPE foam with fine closed-cell structure
- Thickness: 0.5 mm-10 mm typical options
- Density: 25-100 kg/m3 for different compression needs
- Color: Black, white, grey
- Use: Gasket, spacer, sealing, cushioning, die-cut parts
