No products were found matching your selection.
Other Related Products
-
- Common thickness: 1/8 inch, 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch, 1 inch
- Color: gray, charcoal gray, or custom dark foam appearance
- Material: open-cell polyether urethane foam
- Adhesive option: rubber PSA, acrylic PSA, single sided, double sided, or plain foam
- Supply form: slit rolls, sheets, kiss-cut pads, and die-cut parts
- Main use: cushioning, gasketing, sound damping, light blocking, and vibration control
-
- Material: Rubber gasket widely used where many types of bases, such as EPDM, PTFE, Neoprene, PVC, Silicone.
- Acids: Acrylic or Silicone Pressure Sensitive Adhesive.
- Type: Adhesive coating on 1 or 2 sides.
- Width Options: 15 mm, 20 mm, 25 mm.
- Length Options: 10 meters.
- Available thickness: 1 mm, 3 mm, 5 mm, 6 mm or custom.
-
- Material: Cellular EPDM foam tape with high tack pressure sensitive acrylic adhesive.
- Width: 6 mm, 10 mm, 15 mm, 25 mm;
- Thickness: 1 mm, 2 mm, 4 mm, 6 mm, 10 mm;
- Length: 1 roll with 10 m.
- Color: Black or Gray
-
- Common Width: 10 cm, 15 cm, 20 cm
- Common Length: 5 m, 10 m, 15 m, 20 m, 50 m
- Color: Green, black, white liner, custom available
- Backing Material: Non-woven fabric or PP cloth
- Adhesive Type: Hot melt pressure-sensitive adhesive
- Use Area: Backing-side artificial grass seam connection
-
- Material: PET/polyester film carrier with acrylic adhesive on both sides
- Color: Clear, translucent, black, or custom tinted film
- Thickness: 0.03 mm to 0.20 mm typical range
- Liner: Glassine paper, PE-coated paper, PET film, or double liner
- Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
- Use: Nameplates, panels, overlays, membrane switches, and electronics
-
- Material: Closed-cell EVA foam
- Adhesive: Acrylic, rubber, or hot melt adhesive
- Color: Black, white, gray, or custom
- Thickness: 1 mm-15 mm typical range
- Width: 5 mm-1000 mm slit roll width
- Form: Rolls, strips, pads, die-cut gaskets
-
- Width: 10 mm-50 mm
- Thickness: 1 mm-5 mm
- Color: Black, grey, custom
- Backing: Heat resistant fiber composite
- Adhesive: High temperature self adhesive backing
- Use Area: Lid edge, door gap, window edge
-
- Common sizes: 3 mm-1240 mm width, slit rolls or die-cut parts
- Color: Clear adhesive with red PE release liner
- Material: Acrylic PSA with PET carrier or selected film structure
- Thickness options: 0.10 mm-0.50 mm typical range
- Surface fit: Glass, metal, plastic, painted panels
- Use: Industrial bonding, signage, panels, and assembly
-
- Adhesive: Pressure sensitive acrylic adhesive is coated on both sides.
- Backing: PE foam.
- Regular Foam Jumbo Roll Size: 1030 mm x 300 m.
- Thickness: 1 mm.
- Release Paper Color: Available in red, green, white, blue or yellow.
