No products were found matching your selection.

Other Related Products

  • Heat Iron Carpet Joining Tape

    • Width: 90 mm / 100 mm
    • Length: 20 m / 50 m
    • Color: Yellow, white, gold
    • Adhesive: Heat activated hot melt
    • Placement: Below carpet joint
    • Use: Heat iron joining
    Read moreDone

  • Double Sided Adhesive Tissue Tape

    • Common sizes: 3 mm-1240 mm width, roll or slit roll
    • Color: Translucent white or light yellow
    • Carrier: Thin non-woven tissue paper
    • Liner: White release paper or yellow glassine liner
    • Thickness: 70 um, 80 um, 90 um, 100 um
    • Use: Paperboard, labels, display cards, gift boxes
    Read moreDone

  • Artificial Grass Tape Solutions for Seaming, Joining and Perimeter Fixing

    Double sided tape for artificial grass can support turf-to-turf seaming, patch repair, light perimeter support and temporary turf-to-floor fixing, but these jobs create different bond lines. Selection should start with the actual turf backing, substrate, exposure, traffic and removal requirement rather than hand tack alone. Main risks include visible joints, edge lift, contaminated or damp contact surfaces, movement before adequate contact develops and adhesive transfer during removal. Where the surface, coating or outdoor condition is uncertain, a representative sample seam should be tested before full use.

    Read moreDone

  • Foam Bonding PSA Tapes

    • Common Size: jumbo rolls, slit rolls, die-cut pads, strips, and laminated sheets.
    • Color: white, black, grey, or custom foam color.
    • Material: PE, EVA, IXPE, or PU foam carrier.
    • Adhesive: acrylic, rubber, or hot melt PSA on both sides.
    • Thickness: 0.3 mm to 3.0 mm typical range.
    • Use: panel bonding, nameplate mounting, molding fixing, and converter processing.
    Read moreDone

  • Double Sided PE Foam Tape Jumbo Roll

    • Material: Closed-cell PE foam carrier
    • Thickness: 0.5 mm-3.0 mm typical
    • Density: 45-100 kg/m3 typical
    • Color: White, black, gray optional
    • Adhesive: Rubber, acrylic, solvent acrylic PSA
    • Processing: Slitting, die-cutting, warm pressing, laminating
    Read moreDone

  • NBR Insulation Foam Tape

    • Material: NBR/PVC flexible elastomeric foam
    • Foam Structure: Closed-cell
    • Color: Black
    • Common Thickness: 3 mm, 5 mm, 6 mm
    • Common Width: 25 mm, 50 mm, 75 mm
    • Adhesive: Pressure-sensitive adhesive with release liner
    Read moreDone

  • Heat Tape For Grills

    • Width: 10 mm-50 mm
    • Thickness: 1 mm-5 mm
    • Color: Black, grey, custom
    • Backing: Heat resistant fiber composite
    • Adhesive: High temperature self adhesive backing
    • Use Area: Lid edge, door gap, window edge
    Read moreDone

  • Double Sided Gasket Tape

    • Common thickness: 0.2 mm-5.0 mm
    • Color: black, white, gray, or custom
    • Carrier: PE foam, PU foam, EPDM, neoprene, or rubber
    • Adhesive: acrylic PSA, rubber PSA, or differential PSA
    • Liner: paper, PET, glassine, coated paper, or dual liner
    • Supply form: rolls, sheets, kiss-cut parts, or die-cut gaskets
    Read moreDone

  • Neoprene Foam Tape Single Sided

    • Material: Closed-cell neoprene foam
    • Color: Black as standard
    • Adhesive: Rubber PSA or acrylic PSA
    • Liner: Kraft paper or PE-coated release liner
    • Thickness: 1 mm-20 mm common range
    • Format: Slit rolls, die-cut gaskets, kiss-cut parts
    Read moreDone