No products were found matching your selection.

Other Related Products

  • Double Sided PE Foam Tape Jumbo Roll

    • Material: Closed-cell PE foam carrier
    • Thickness: 0.5 mm-3.0 mm typical
    • Density: 45-100 kg/m3 typical
    • Color: White, black, gray optional
    • Adhesive: Rubber, acrylic, solvent acrylic PSA
    • Processing: Slitting, die-cutting, warm pressing, laminating
    Read moreDone

  • Foam Bonding PSA Tapes

    • Common Size: jumbo rolls, slit rolls, die-cut pads, strips, and laminated sheets.
    • Color: white, black, grey, or custom foam color.
    • Material: PE, EVA, IXPE, or PU foam carrier.
    • Adhesive: acrylic, rubber, or hot melt PSA on both sides.
    • Thickness: 0.3 mm to 3.0 mm typical range.
    • Use: panel bonding, nameplate mounting, molding fixing, and converter processing.
    Read moreDone

  • Closed Cell EPDM Foam Properties and Technical Specifications

    Closed cell EPDM foam properties are commonly compared through compression deflection, compression set, density, tensile strength, elongation, water absorption, and resistance to temperature, ozone, and weather. These values help screen grades for sealing, gasketing, cushioning, and adhesive-backed constructions. Read results with the stated test method and specimen condition, then confirm suitability on the intended surface, compression level, adhesive construction, and service environment.

    Read moreDone

  • Double Sided Acrylic Tape Shear Strength & Technical Test Data

    Double sided acrylic tape shear strength describes resistance to a sustained load acting parallel to bonded surfaces. The value is meaningful only when bonded area, load, substrate, temperature, application pressure, dwell time, and failure criterion are stated. It explains static shear holding, how it differs from peel and tack, and when results are not comparable. Typical values and reference ranges should be confirmed by sample testing.

    Read moreDone

  • Heat Tape For Grills

    • Width: 10 mm-50 mm
    • Thickness: 1 mm-5 mm
    • Color: Black, grey, custom
    • Backing: Heat resistant fiber composite
    • Adhesive: High temperature self adhesive backing
    • Use Area: Lid edge, door gap, window edge
    Read moreDone

  • EVA Foam Sealing Tape

    • Material: Closed-cell EVA foam
    • Adhesive: Acrylic, rubber, or hot melt adhesive
    • Color: Black, white, gray, or custom
    • Thickness: 1 mm-15 mm typical range
    • Width: 5 mm-1000 mm slit roll width
    • Form: Rolls, strips, pads, die-cut gaskets
    Read moreDone

  • NBR Insulation Foam Tape

    • Material: NBR/PVC flexible elastomeric foam
    • Foam Structure: Closed-cell
    • Color: Black
    • Common Thickness: 3 mm, 5 mm, 6 mm
    • Common Width: 25 mm, 50 mm, 75 mm
    • Adhesive: Pressure-sensitive adhesive with release liner
    Read moreDone

  • PVC Foam Glazing Tape

    • Material: Closed-cell PVC foam carrier
    • Colors: Black and white
    • Adhesive: Acrylic or solvent acrylic PSA
    • Liner: Blue film liner or paper liner
    • Thickness: 0.8 mm-12.7 mm, custom available
    • Supply: Slit rolls, master rolls, die-cut parts
    Read moreDone

  • EPDM Self Adhesive Tape

    • Common size: 2-20 mm thickness, custom slit width
    • Color: Black EPDM foam with protected adhesive side
    • Material: Closed-cell EPDM foam carrier
    • Adhesive: One-sided pressure sensitive backing
    • Liner: Peel-off paper or film release liner
    • Use: Sealing, cushioning, gap filling
    Read moreDone