No products were found matching your selection.
Other Related Products
-


- Width: 10 mm-50 mm
- Thickness: 1 mm-5 mm
- Color: Black, grey, custom
- Backing: Heat resistant fiber composite
- Adhesive: High temperature self adhesive backing
- Use Area: Lid edge, door gap, window edge
-


- Common size: 2-20 mm thickness, custom slit width
- Color: Black EPDM foam with protected adhesive side
- Material: Closed-cell EPDM foam carrier
- Adhesive: One-sided pressure sensitive backing
- Liner: Peel-off paper or film release liner
- Use: Sealing, cushioning, gap filling
-

Closed cell EPDM foam properties are commonly compared through compression deflection, compression set, density, tensile strength, elongation, water absorption, and resistance to temperature, ozone, and weather. These values help screen grades for sealing, gasketing, cushioning, and adhesive-backed constructions. Read results with the stated test method and specimen condition, then confirm suitability on the intended surface, compression level, adhesive construction, and service environment.
-


- Standard widths: 10mm, 15mm, 20mm, 25mm
- Color: Transparent
- Carrier material: Thin PET film (25 u)
- Adhesive type: Skin-safe acrylic layer, 80 u
- Application: Temporary fabric-to-fabric or fabric-to-skin fixing
- Peel adhesion: 0.8–1.2 N/cm (fabric-to-fabric), 0.5–0.9 N/cm (fabric-to-skin)
-


- Common Width: 10 cm, 15 cm, 20 cm
- Common Length: 5 m, 10 m, 15 m, 20 m, 50 m
- Color: Green, black, white liner, custom available
- Backing Material: Non-woven fabric or PP cloth
- Adhesive Type: Hot melt pressure-sensitive adhesive
- Use Area: Backing-side artificial grass seam connection
-


- Common thickness: 0.4 mm, 0.6 mm, 0.8 mm, 1.0 mm, 1.2 mm, 1.5 mm
- Color: black, gray, white, or custom foam color
- Foam carrier: closed-cell PE foam or acrylic foam option
- Adhesive: automotive-grade acrylic pressure-sensitive adhesive
- Liner: red PE film, white paper, or easy-release film liner
- Typical tolerance: +/-05 mm thickness, +/-0.5 mm slitting reference
-

Double sided tape for artificial grass can support turf-to-turf seaming, patch repair, light perimeter support and temporary turf-to-floor fixing, but these jobs create different bond lines. Selection should start with the actual turf backing, substrate, exposure, traffic and removal requirement rather than hand tack alone. Main risks include visible joints, edge lift, contaminated or damp contact surfaces, movement before adequate contact develops and adhesive transfer during removal. Where the surface, coating or outdoor condition is uncertain, a representative sample seam should be tested before full use.
-


- Material: PET/polyester film carrier with acrylic adhesive on both sides
- Color: Clear, translucent, black, or custom tinted film
- Thickness: 0.03 mm to 0.20 mm typical range
- Liner: Glassine paper, PE-coated paper, PET film, or double liner
- Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
- Use: Nameplates, panels, overlays, membrane switches, and electronics