No products were found matching your selection.

Other Related Products

  • NBR Insulation Foam Tape

    • Material: NBR/PVC flexible elastomeric foam
    • Foam Structure: Closed-cell
    • Color: Black
    • Common Thickness: 3 mm, 5 mm, 6 mm
    • Common Width: 25 mm, 50 mm, 75 mm
    • Adhesive: Pressure-sensitive adhesive with release liner
    Read moreDone

  • Double Sided Acrylic Tape Shear Strength & Technical Test Data

    Double sided acrylic tape shear strength describes resistance to a sustained load acting parallel to bonded surfaces. The value is meaningful only when bonded area, load, substrate, temperature, application pressure, dwell time, and failure criterion are stated. It explains static shear holding, how it differs from peel and tack, and when results are not comparable. Typical values and reference ranges should be confirmed by sample testing.

    Read moreDone

  • Polyether Urethane Foam Tape

    • Common thickness: 1/8 inch, 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch, 1 inch
    • Color: gray, charcoal gray, or custom dark foam appearance
    • Material: open-cell polyether urethane foam
    • Adhesive option: rubber PSA, acrylic PSA, single sided, double sided, or plain foam
    • Supply form: slit rolls, sheets, kiss-cut pads, and die-cut parts
    • Main use: cushioning, gasketing, sound damping, light blocking, and vibration control
    Read moreDone

  • Seaming Tape For Artificial Grass

    • Common Width: 10 cm, 15 cm, 20 cm
    • Common Length: 5 m, 10 m, 15 m, 20 m, 50 m
    • Color: Green, black, white liner, custom available
    • Backing Material: Non-woven fabric or PP cloth
    • Adhesive Type: Hot melt pressure-sensitive adhesive
    • Use Area: Backing-side artificial grass seam connection
    Read moreDone

  • Double Sided Gasket Tape

    • Common thickness: 0.2 mm-5.0 mm
    • Color: black, white, gray, or custom
    • Carrier: PE foam, PU foam, EPDM, neoprene, or rubber
    • Adhesive: acrylic PSA, rubber PSA, or differential PSA
    • Liner: paper, PET, glassine, coated paper, or dual liner
    • Supply form: rolls, sheets, kiss-cut parts, or die-cut gaskets
    Read moreDone

  • Heat Tape For Grills

    • Width: 10 mm-50 mm
    • Thickness: 1 mm-5 mm
    • Color: Black, grey, custom
    • Backing: Heat resistant fiber composite
    • Adhesive: High temperature self adhesive backing
    • Use Area: Lid edge, door gap, window edge
    Read moreDone

  • High Performance Acrylic Adhesive Tape

    • Common sizes: 3 mm-1240 mm width, slit rolls or die-cut parts
    • Color: Clear adhesive with red PE release liner
    • Material: Acrylic PSA with PET carrier or selected film structure
    • Thickness options: 0.10 mm-0.50 mm typical range
    • Surface fit: Glass, metal, plastic, painted panels
    • Use: Industrial bonding, signage, panels, and assembly
    Read moreDone

  • Heat Iron Carpet Joining Tape

    • Width: 90 mm / 100 mm
    • Length: 20 m / 50 m
    • Color: Yellow, white, gold
    • Adhesive: Heat activated hot melt
    • Placement: Below carpet joint
    • Use: Heat iron joining
    Read moreDone

  • Double Sided PET Polyester Acrylic Adhesive Tape

    • Material: PET/polyester film carrier with acrylic adhesive on both sides
    • Color: Clear, translucent, black, or custom tinted film
    • Thickness: 0.03 mm to 0.20 mm typical range
    • Liner: Glassine paper, PE-coated paper, PET film, or double liner
    • Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
    • Use: Nameplates, panels, overlays, membrane switches, and electronics
    Read moreDone