No products were found matching your selection.

Other Related Products

  • Double Sided PET Polyester Acrylic Adhesive Tape

    • Material: PET/polyester film carrier with acrylic adhesive on both sides
    • Color: Clear, translucent, black, or custom tinted film
    • Thickness: 0.03 mm to 0.20 mm typical range
    • Liner: Glassine paper, PE-coated paper, PET film, or double liner
    • Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
    • Use: Nameplates, panels, overlays, membrane switches, and electronics
    Read moreDone

  • Heat Tape For Grills

    • Width: 10 mm-50 mm
    • Thickness: 1 mm-5 mm
    • Color: Black, grey, custom
    • Backing: Heat resistant fiber composite
    • Adhesive: High temperature self adhesive backing
    • Use Area: Lid edge, door gap, window edge
    Read moreDone

  • NBR Insulation Foam Tape

    • Material: NBR/PVC flexible elastomeric foam
    • Foam Structure: Closed-cell
    • Color: Black
    • Common Thickness: 3 mm, 5 mm, 6 mm
    • Common Width: 25 mm, 50 mm, 75 mm
    • Adhesive: Pressure-sensitive adhesive with release liner
    Read moreDone

  • EPDM Self Adhesive Tape

    • Common size: 2-20 mm thickness, custom slit width
    • Color: Black EPDM foam with protected adhesive side
    • Material: Closed-cell EPDM foam carrier
    • Adhesive: One-sided pressure sensitive backing
    • Liner: Peel-off paper or film release liner
    • Use: Sealing, cushioning, gap filling
    Read moreDone

  • Double Sided PE Foam Tape Jumbo Roll

    • Material: Closed-cell PE foam carrier
    • Thickness: 0.5 mm-3.0 mm typical
    • Density: 45-100 kg/m3 typical
    • Color: White, black, gray optional
    • Adhesive: Rubber, acrylic, solvent acrylic PSA
    • Processing: Slitting, die-cutting, warm pressing, laminating
    Read moreDone

  • Double Sided Acrylic Tape Shear Strength & Technical Test Data

    Double sided acrylic tape shear strength describes resistance to a sustained load acting parallel to bonded surfaces. The value is meaningful only when bonded area, load, substrate, temperature, application pressure, dwell time, and failure criterion are stated. It explains static shear holding, how it differs from peel and tack, and when results are not comparable. Typical values and reference ranges should be confirmed by sample testing.

    Read moreDone

  • Neoprene Foam Tape Single Sided

    • Material: Closed-cell neoprene foam
    • Color: Black as standard
    • Adhesive: Rubber PSA or acrylic PSA
    • Liner: Kraft paper or PE-coated release liner
    • Thickness: 1 mm-20 mm common range
    • Format: Slit rolls, die-cut gaskets, kiss-cut parts
    Read moreDone

  • Cross Linked Polyethylene Foam Tape

    • Material: Cross-linked PE foam carrier
    • Foam Type: IXPE foam with fine closed-cell structure
    • Thickness: 0.5 mm-10 mm typical options
    • Density: 25-100 kg/m3 for different compression needs
    • Color: Black, white, grey
    • Use: Gasket, spacer, sealing, cushioning, die-cut parts
    Read moreDone

  • Heat Iron Carpet Joining Tape

    • Width: 90 mm / 100 mm
    • Length: 20 m / 50 m
    • Color: Yellow, white, gold
    • Adhesive: Heat activated hot melt
    • Placement: Below carpet joint
    • Use: Heat iron joining
    Read moreDone