No products were found matching your selection.

Other Related Products

  • Double Sided PE Foam Tape Jumbo Roll

    • Material: Closed-cell PE foam carrier
    • Thickness: 0.5 mm-3.0 mm typical
    • Density: 45-100 kg/m3 typical
    • Color: White, black, gray optional
    • Adhesive: Rubber, acrylic, solvent acrylic PSA
    • Processing: Slitting, die-cutting, warm pressing, laminating
    Read moreDone

  • Foam Bonding PSA Tapes

    • Common Size: jumbo rolls, slit rolls, die-cut pads, strips, and laminated sheets.
    • Color: white, black, grey, or custom foam color.
    • Material: PE, EVA, IXPE, or PU foam carrier.
    • Adhesive: acrylic, rubber, or hot melt PSA on both sides.
    • Thickness: 0.3 mm to 3.0 mm typical range.
    • Use: panel bonding, nameplate mounting, molding fixing, and converter processing.
    Read moreDone

  • Double Sided PET Polyester Acrylic Adhesive Tape

    • Material: PET/polyester film carrier with acrylic adhesive on both sides
    • Color: Clear, translucent, black, or custom tinted film
    • Thickness: 0.03 mm to 0.20 mm typical range
    • Liner: Glassine paper, PE-coated paper, PET film, or double liner
    • Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
    • Use: Nameplates, panels, overlays, membrane switches, and electronics
    Read moreDone

  • Double Sided Gasket Tape

    • Common thickness: 0.2 mm-5.0 mm
    • Color: black, white, gray, or custom
    • Carrier: PE foam, PU foam, EPDM, neoprene, or rubber
    • Adhesive: acrylic PSA, rubber PSA, or differential PSA
    • Liner: paper, PET, glassine, coated paper, or dual liner
    • Supply form: rolls, sheets, kiss-cut parts, or die-cut gaskets
    Read moreDone

  • Double Sided Acrylic Tape Shear Strength & Technical Test Data

    Double sided acrylic tape shear strength describes resistance to a sustained load acting parallel to bonded surfaces. The value is meaningful only when bonded area, load, substrate, temperature, application pressure, dwell time, and failure criterion are stated. It explains static shear holding, how it differs from peel and tack, and when results are not comparable. Typical values and reference ranges should be confirmed by sample testing.

    Read moreDone

  • Heat Iron Carpet Joining Tape

    • Width: 90 mm / 100 mm
    • Length: 20 m / 50 m
    • Color: Yellow, white, gold
    • Adhesive: Heat activated hot melt
    • Placement: Below carpet joint
    • Use: Heat iron joining
    Read moreDone

  • NBR Insulation Foam Tape

    • Material: NBR/PVC flexible elastomeric foam
    • Foam Structure: Closed-cell
    • Color: Black
    • Common Thickness: 3 mm, 5 mm, 6 mm
    • Common Width: 25 mm, 50 mm, 75 mm
    • Adhesive: Pressure-sensitive adhesive with release liner
    Read moreDone

  • Nano PU Gel Tape

    • Material: Transparent PU gel adhesive
    • Color: Clear, high transparency
    • Thickness: 0.5 mm, 1.0 mm, 2.0 mm, 3.0 mm
    • Format: Roll, pad, strip, gasket
    • Width: 10 mm-500 mm or slit to size
    • Processing: Slitting, die cutting, kiss cutting
    Read moreDone

  • EVA Foam Sealing Tape

    • Material: Closed-cell EVA foam
    • Adhesive: Acrylic, rubber, or hot melt adhesive
    • Color: Black, white, gray, or custom
    • Thickness: 1 mm-15 mm typical range
    • Width: 5 mm-1000 mm slit roll width
    • Form: Rolls, strips, pads, die-cut gaskets
    Read moreDone