No products were found matching your selection.

Other Related Products

  • Neoprene Foam Tape Single Sided

    • Material: Closed-cell neoprene foam
    • Color: Black as standard
    • Adhesive: Rubber PSA or acrylic PSA
    • Liner: Kraft paper or PE-coated release liner
    • Thickness: 1 mm-20 mm common range
    • Format: Slit rolls, die-cut gaskets, kiss-cut parts
    Read moreDone

  • Heat Tape For Grills

    • Width: 10 mm-50 mm
    • Thickness: 1 mm-5 mm
    • Color: Black, grey, custom
    • Backing: Heat resistant fiber composite
    • Adhesive: High temperature self adhesive backing
    • Use Area: Lid edge, door gap, window edge
    Read moreDone

  • Double Sided Tissue Tape Jumbo Roll

    • Common size: 1020mm / 1240mm usable width, 500m-1200m length
    • Color: White or light yellow tape, white/yellow release paper
    • Carrier: Tissue paper or non-woven tissue carrier
    • Adhesive: Hot melt, water-based acrylic, or solvent acrylic
    • Liner: Glassine, white release paper, or PCK liner
    • Use: Die cutting, labels, nameplates, foam, paperboard bonding
    Read moreDone

  • Double Sided Acrylic Tape Shear Strength & Technical Test Data

    Double sided acrylic tape shear strength describes resistance to a sustained load acting parallel to bonded surfaces. The value is meaningful only when bonded area, load, substrate, temperature, application pressure, dwell time, and failure criterion are stated. It explains static shear holding, how it differs from peel and tack, and when results are not comparable. Typical values and reference ranges should be confirmed by sample testing.

    Read moreDone

  • Double Sided Foam Tape For Automotive Decorative Trim Strip

    • Common thickness: 0.4 mm, 0.6 mm, 0.8 mm, 1.0 mm, 1.2 mm, 1.5 mm
    • Color: black, gray, white, or custom foam color
    • Foam carrier: closed-cell PE foam or acrylic foam option
    • Adhesive: automotive-grade acrylic pressure-sensitive adhesive
    • Liner: red PE film, white paper, or easy-release film liner
    • Typical tolerance: +/-05 mm thickness, +/-0.5 mm slitting reference
    Read moreDone

  • Double Sided PE Foam Tape Jumbo Roll

    • Material: Closed-cell PE foam carrier
    • Thickness: 0.5 mm-3.0 mm typical
    • Density: 45-100 kg/m3 typical
    • Color: White, black, gray optional
    • Adhesive: Rubber, acrylic, solvent acrylic PSA
    • Processing: Slitting, die-cutting, warm pressing, laminating
    Read moreDone

  • Double Face Tape For Clothing

    • Standard widths: 10mm, 15mm, 20mm, 25mm
    • Color: Transparent
    • Carrier material: Thin PET film (25 u)
    • Adhesive type: Skin-safe acrylic layer, 80 u
    • Application: Temporary fabric-to-fabric or fabric-to-skin fixing
    • Peel adhesion: 0.8–1.2 N/cm (fabric-to-fabric), 0.5–0.9 N/cm (fabric-to-skin)
    Read moreDone

  • Foam Bonding PSA Tapes

    • Common Size: jumbo rolls, slit rolls, die-cut pads, strips, and laminated sheets.
    • Color: white, black, grey, or custom foam color.
    • Material: PE, EVA, IXPE, or PU foam carrier.
    • Adhesive: acrylic, rubber, or hot melt PSA on both sides.
    • Thickness: 0.3 mm to 3.0 mm typical range.
    • Use: panel bonding, nameplate mounting, molding fixing, and converter processing.
    Read moreDone

  • Nano PU Gel Tape

    • Material: Transparent PU gel adhesive
    • Color: Clear, high transparency
    • Thickness: 0.5 mm, 1.0 mm, 2.0 mm, 3.0 mm
    • Format: Roll, pad, strip, gasket
    • Width: 10 mm-500 mm or slit to size
    • Processing: Slitting, die cutting, kiss cutting
    Read moreDone