No products were found matching your selection.

Other Related Products

  • Heat Tape For Grills

    • Width: 10 mm-50 mm
    • Thickness: 1 mm-5 mm
    • Color: Black, grey, custom
    • Backing: Heat resistant fiber composite
    • Adhesive: High temperature self adhesive backing
    • Use Area: Lid edge, door gap, window edge
    Read moreDone

  • Seaming Tape For Artificial Grass

    • Common Width: 10 cm, 15 cm, 20 cm
    • Common Length: 5 m, 10 m, 15 m, 20 m, 50 m
    • Color: Green, black, white liner, custom available
    • Backing Material: Non-woven fabric or PP cloth
    • Adhesive Type: Hot melt pressure-sensitive adhesive
    • Use Area: Backing-side artificial grass seam connection
    Read moreDone

  • EVA Foam Sealing Tape

    • Material: Closed-cell EVA foam
    • Adhesive: Acrylic, rubber, or hot melt adhesive
    • Color: Black, white, gray, or custom
    • Thickness: 1 mm-15 mm typical range
    • Width: 5 mm-1000 mm slit roll width
    • Form: Rolls, strips, pads, die-cut gaskets
    Read moreDone

  • NBR Insulation Foam Tape

    • Material: NBR/PVC flexible elastomeric foam
    • Foam Structure: Closed-cell
    • Color: Black
    • Common Thickness: 3 mm, 5 mm, 6 mm
    • Common Width: 25 mm, 50 mm, 75 mm
    • Adhesive: Pressure-sensitive adhesive with release liner
    Read moreDone

  • Double Face Tape For Clothing

    • Standard widths: 10mm, 15mm, 20mm, 25mm
    • Color: Transparent
    • Carrier material: Thin PET film (25 u)
    • Adhesive type: Skin-safe acrylic layer, 80 u
    • Application: Temporary fabric-to-fabric or fabric-to-skin fixing
    • Peel adhesion: 0.8–1.2 N/cm (fabric-to-fabric), 0.5–0.9 N/cm (fabric-to-skin)
    Read moreDone

  • EPDM Self Adhesive Tape

    • Common size: 2-20 mm thickness, custom slit width
    • Color: Black EPDM foam with protected adhesive side
    • Material: Closed-cell EPDM foam carrier
    • Adhesive: One-sided pressure sensitive backing
    • Liner: Peel-off paper or film release liner
    • Use: Sealing, cushioning, gap filling
    Read moreDone

  • Double Sided PET Polyester Acrylic Adhesive Tape

    • Material: PET/polyester film carrier with acrylic adhesive on both sides
    • Color: Clear, translucent, black, or custom tinted film
    • Thickness: 0.03 mm to 0.20 mm typical range
    • Liner: Glassine paper, PE-coated paper, PET film, or double liner
    • Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
    • Use: Nameplates, panels, overlays, membrane switches, and electronics
    Read moreDone

  • PVC Foam Glazing Tape

    • Material: Closed-cell PVC foam carrier
    • Colors: Black and white
    • Adhesive: Acrylic or solvent acrylic PSA
    • Liner: Blue film liner or paper liner
    • Thickness: 0.8 mm-12.7 mm, custom available
    • Supply: Slit rolls, master rolls, die-cut parts
    Read moreDone

  • Double Sided Acrylic Tape Shear Strength & Technical Test Data

    Double sided acrylic tape shear strength describes resistance to a sustained load acting parallel to bonded surfaces. The value is meaningful only when bonded area, load, substrate, temperature, application pressure, dwell time, and failure criterion are stated. It explains static shear holding, how it differs from peel and tack, and when results are not comparable. Typical values and reference ranges should be confirmed by sample testing.

    Read moreDone