No products were found matching your selection.
Other Related Products
-


- Common sizes: 3 mm-1240 mm width, roll or slit roll
- Color: Translucent white or light yellow
- Carrier: Thin non-woven tissue paper
- Liner: White release paper or yellow glassine liner
- Thickness: 70 um, 80 um, 90 um, 100 um
- Use: Paperboard, labels, display cards, gift boxes
-

Closed cell EPDM foam properties are commonly compared through compression deflection, compression set, density, tensile strength, elongation, water absorption, and resistance to temperature, ozone, and weather. These values help screen grades for sealing, gasketing, cushioning, and adhesive-backed constructions. Read results with the stated test method and specimen condition, then confirm suitability on the intended surface, compression level, adhesive construction, and service environment.
-


- Material: Transparent PU gel adhesive
- Color: Clear, high transparency
- Thickness: 0.5 mm, 1.0 mm, 2.0 mm, 3.0 mm
- Format: Roll, pad, strip, gasket
- Width: 10 mm-500 mm or slit to size
- Processing: Slitting, die cutting, kiss cutting
-


- Standard widths: 10mm, 15mm, 20mm, 25mm
- Color: Transparent
- Carrier material: Thin PET film (25 u)
- Adhesive type: Skin-safe acrylic layer, 80 u
- Application: Temporary fabric-to-fabric or fabric-to-skin fixing
- Peel adhesion: 0.8–1.2 N/cm (fabric-to-fabric), 0.5–0.9 N/cm (fabric-to-skin)
-

Double sided acrylic tape shear strength describes resistance to a sustained load acting parallel to bonded surfaces. The value is meaningful only when bonded area, load, substrate, temperature, application pressure, dwell time, and failure criterion are stated. It explains static shear holding, how it differs from peel and tack, and when results are not comparable. Typical values and reference ranges should be confirmed by sample testing.
-


- Material: Closed-cell PVC foam carrier
- Colors: Black and white
- Adhesive: Acrylic or solvent acrylic PSA
- Liner: Blue film liner or paper liner
- Thickness: 0.8 mm-12.7 mm, custom available
- Supply: Slit rolls, master rolls, die-cut parts
-


- Material: NBR/PVC flexible elastomeric foam
- Foam Structure: Closed-cell
- Color: Black
- Common Thickness: 3 mm, 5 mm, 6 mm
- Common Width: 25 mm, 50 mm, 75 mm
- Adhesive: Pressure-sensitive adhesive with release liner
-


- Material: Closed-cell neoprene foam
- Color: Black as standard
- Adhesive: Rubber PSA or acrylic PSA
- Liner: Kraft paper or PE-coated release liner
- Thickness: 1 mm-20 mm common range
- Format: Slit rolls, die-cut gaskets, kiss-cut parts
-


- Common Width: 10 cm, 15 cm, 20 cm
- Common Length: 5 m, 10 m, 15 m, 20 m, 50 m
- Color: Green, black, white liner, custom available
- Backing Material: Non-woven fabric or PP cloth
- Adhesive Type: Hot melt pressure-sensitive adhesive
- Use Area: Backing-side artificial grass seam connection