No products were found matching your selection.
Other Related Products
-
- Common Size: jumbo rolls, slit rolls, die-cut pads, strips, and laminated sheets.
- Color: white, black, grey, or custom foam color.
- Material: PE, EVA, IXPE, or PU foam carrier.
- Adhesive: acrylic, rubber, or hot melt PSA on both sides.
- Thickness: 0.3 mm to 3.0 mm typical range.
- Use: panel bonding, nameplate mounting, molding fixing, and converter processing.
-
- Common size: 2-20 mm thickness, custom slit width
- Color: Black EPDM foam with protected adhesive side
- Material: Closed-cell EPDM foam carrier
- Adhesive: One-sided pressure sensitive backing
- Liner: Peel-off paper or film release liner
- Use: Sealing, cushioning, gap filling
-
- Width: 90 mm / 100 mm
- Length: 20 m / 50 m
- Color: Yellow, white, gold
- Adhesive: Heat activated hot melt
- Placement: Below carpet joint
- Use: Heat iron joining
-
Double sided tape for artificial grass can support turf-to-turf seaming, patch repair, light perimeter support and temporary turf-to-floor fixing, but these jobs create different bond lines. Selection should start with the actual turf backing, substrate, exposure, traffic and removal requirement rather than hand tack alone. Main risks include visible joints, edge lift, contaminated or damp contact surfaces, movement before adequate contact develops and adhesive transfer during removal. Where the surface, coating or outdoor condition is uncertain, a representative sample seam should be tested before full use.
-
- Material: Closed-cell PVC foam carrier
- Colors: Black and white
- Adhesive: Acrylic or solvent acrylic PSA
- Liner: Blue film liner or paper liner
- Thickness: 0.8 mm-12.7 mm, custom available
- Supply: Slit rolls, master rolls, die-cut parts
-
- Common sizes: 3 mm-1240 mm width, roll or slit roll
- Color: Translucent white or light yellow
- Carrier: Thin non-woven tissue paper
- Liner: White release paper or yellow glassine liner
- Thickness: 70 um, 80 um, 90 um, 100 um
- Use: Paperboard, labels, display cards, gift boxes
-
- Material: Closed-cell EVA foam
- Adhesive: Acrylic, rubber, or hot melt adhesive
- Color: Black, white, gray, or custom
- Thickness: 1 mm-15 mm typical range
- Width: 5 mm-1000 mm slit roll width
- Form: Rolls, strips, pads, die-cut gaskets
-
- Material: PET/polyester film carrier with acrylic adhesive on both sides
- Color: Clear, translucent, black, or custom tinted film
- Thickness: 0.03 mm to 0.20 mm typical range
- Liner: Glassine paper, PE-coated paper, PET film, or double liner
- Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
- Use: Nameplates, panels, overlays, membrane switches, and electronics
