No products were found matching your selection.

Other Related Products

  • NBR Insulation Foam Tape

    • Material: NBR/PVC flexible elastomeric foam
    • Foam Structure: Closed-cell
    • Color: Black
    • Common Thickness: 3 mm, 5 mm, 6 mm
    • Common Width: 25 mm, 50 mm, 75 mm
    • Adhesive: Pressure-sensitive adhesive with release liner
    Read moreDone

  • PVC Foam Glazing Tape

    • Material: Closed-cell PVC foam carrier
    • Colors: Black and white
    • Adhesive: Acrylic or solvent acrylic PSA
    • Liner: Blue film liner or paper liner
    • Thickness: 0.8 mm-12.7 mm, custom available
    • Supply: Slit rolls, master rolls, die-cut parts
    Read moreDone

  • Artificial Grass Tape Solutions for Seaming, Joining and Perimeter Fixing

    Double sided tape for artificial grass can support turf-to-turf seaming, patch repair, light perimeter support and temporary turf-to-floor fixing, but these jobs create different bond lines. Selection should start with the actual turf backing, substrate, exposure, traffic and removal requirement rather than hand tack alone. Main risks include visible joints, edge lift, contaminated or damp contact surfaces, movement before adequate contact develops and adhesive transfer during removal. Where the surface, coating or outdoor condition is uncertain, a representative sample seam should be tested before full use.

    Read moreDone

  • Double Sided Acrylic Tape Shear Strength & Technical Test Data

    Double sided acrylic tape shear strength describes resistance to a sustained load acting parallel to bonded surfaces. The value is meaningful only when bonded area, load, substrate, temperature, application pressure, dwell time, and failure criterion are stated. It explains static shear holding, how it differs from peel and tack, and when results are not comparable. Typical values and reference ranges should be confirmed by sample testing.

    Read moreDone

  • High Performance Acrylic Adhesive Tape

    • Common sizes: 3 mm-1240 mm width, slit rolls or die-cut parts
    • Color: Clear adhesive with red PE release liner
    • Material: Acrylic PSA with PET carrier or selected film structure
    • Thickness options: 0.10 mm-0.50 mm typical range
    • Surface fit: Glass, metal, plastic, painted panels
    • Use: Industrial bonding, signage, panels, and assembly
    Read moreDone

  • Double Sided Gasket Tape

    • Common thickness: 0.2 mm-5.0 mm
    • Color: black, white, gray, or custom
    • Carrier: PE foam, PU foam, EPDM, neoprene, or rubber
    • Adhesive: acrylic PSA, rubber PSA, or differential PSA
    • Liner: paper, PET, glassine, coated paper, or dual liner
    • Supply form: rolls, sheets, kiss-cut parts, or die-cut gaskets
    Read moreDone

  • Polyether Urethane Foam Tape

    • Common thickness: 1/8 inch, 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch, 1 inch
    • Color: gray, charcoal gray, or custom dark foam appearance
    • Material: open-cell polyether urethane foam
    • Adhesive option: rubber PSA, acrylic PSA, single sided, double sided, or plain foam
    • Supply form: slit rolls, sheets, kiss-cut pads, and die-cut parts
    • Main use: cushioning, gasketing, sound damping, light blocking, and vibration control
    Read moreDone

  • Nano PU Gel Tape

    • Material: Transparent PU gel adhesive
    • Color: Clear, high transparency
    • Thickness: 0.5 mm, 1.0 mm, 2.0 mm, 3.0 mm
    • Format: Roll, pad, strip, gasket
    • Width: 10 mm-500 mm or slit to size
    • Processing: Slitting, die cutting, kiss cutting
    Read moreDone

  • Heat Iron Carpet Joining Tape

    • Width: 90 mm / 100 mm
    • Length: 20 m / 50 m
    • Color: Yellow, white, gold
    • Adhesive: Heat activated hot melt
    • Placement: Below carpet joint
    • Use: Heat iron joining
    Read moreDone