No products were found matching your selection.

Other Related Products

  • Double Sided Acrylic Tape Shear Strength & Technical Test Data

    Double sided acrylic tape shear strength describes resistance to a sustained load acting parallel to bonded surfaces. The value is meaningful only when bonded area, load, substrate, temperature, application pressure, dwell time, and failure criterion are stated. It explains static shear holding, how it differs from peel and tack, and when results are not comparable. Typical values and reference ranges should be confirmed by sample testing.

    Read moreDone

  • Double Sided Tissue Tape Jumbo Roll

    • Common size: 1020mm / 1240mm usable width, 500m-1200m length
    • Color: White or light yellow tape, white/yellow release paper
    • Carrier: Tissue paper or non-woven tissue carrier
    • Adhesive: Hot melt, water-based acrylic, or solvent acrylic
    • Liner: Glassine, white release paper, or PCK liner
    • Use: Die cutting, labels, nameplates, foam, paperboard bonding
    Read moreDone

  • Double Face Tape For Clothing

    • Standard widths: 10mm, 15mm, 20mm, 25mm
    • Color: Transparent
    • Carrier material: Thin PET film (25 u)
    • Adhesive type: Skin-safe acrylic layer, 80 u
    • Application: Temporary fabric-to-fabric or fabric-to-skin fixing
    • Peel adhesion: 0.8–1.2 N/cm (fabric-to-fabric), 0.5–0.9 N/cm (fabric-to-skin)
    Read moreDone

  • Neoprene Foam Tape Single Sided

    • Material: Closed-cell neoprene foam
    • Color: Black as standard
    • Adhesive: Rubber PSA or acrylic PSA
    • Liner: Kraft paper or PE-coated release liner
    • Thickness: 1 mm-20 mm common range
    • Format: Slit rolls, die-cut gaskets, kiss-cut parts
    Read moreDone

  • Double Sided Gasket Tape

    • Common thickness: 0.2 mm-5.0 mm
    • Color: black, white, gray, or custom
    • Carrier: PE foam, PU foam, EPDM, neoprene, or rubber
    • Adhesive: acrylic PSA, rubber PSA, or differential PSA
    • Liner: paper, PET, glassine, coated paper, or dual liner
    • Supply form: rolls, sheets, kiss-cut parts, or die-cut gaskets
    Read moreDone

  • EPDM Self Adhesive Tape

    • Common size: 2-20 mm thickness, custom slit width
    • Color: Black EPDM foam with protected adhesive side
    • Material: Closed-cell EPDM foam carrier
    • Adhesive: One-sided pressure sensitive backing
    • Liner: Peel-off paper or film release liner
    • Use: Sealing, cushioning, gap filling
    Read moreDone

  • Heat Tape For Grills

    • Width: 10 mm-50 mm
    • Thickness: 1 mm-5 mm
    • Color: Black, grey, custom
    • Backing: Heat resistant fiber composite
    • Adhesive: High temperature self adhesive backing
    • Use Area: Lid edge, door gap, window edge
    Read moreDone

  • Double Sided PET Polyester Acrylic Adhesive Tape

    • Material: PET/polyester film carrier with acrylic adhesive on both sides
    • Color: Clear, translucent, black, or custom tinted film
    • Thickness: 0.03 mm to 0.20 mm typical range
    • Liner: Glassine paper, PE-coated paper, PET film, or double liner
    • Format: Jumbo roll, slit roll, sheet, kiss-cut, or die-cut part
    • Use: Nameplates, panels, overlays, membrane switches, and electronics
    Read moreDone

  • Double Sided Foam Tape For Automotive Decorative Trim Strip

    • Common thickness: 0.4 mm, 0.6 mm, 0.8 mm, 1.0 mm, 1.2 mm, 1.5 mm
    • Color: black, gray, white, or custom foam color
    • Foam carrier: closed-cell PE foam or acrylic foam option
    • Adhesive: automotive-grade acrylic pressure-sensitive adhesive
    • Liner: red PE film, white paper, or easy-release film liner
    • Typical tolerance: +/-05 mm thickness, +/-0.5 mm slitting reference
    Read moreDone