No products were found matching your selection.
Other Related Products
-
- Material: Closed-cell PVC foam carrier
- Colors: Black and white
- Adhesive: Acrylic or solvent acrylic PSA
- Liner: Blue film liner or paper liner
- Thickness: 0.8 mm-12.7 mm, custom available
- Supply: Slit rolls, master rolls, die-cut parts
-
- Material: Transparent PU gel adhesive
- Color: Clear, high transparency
- Thickness: 0.5 mm, 1.0 mm, 2.0 mm, 3.0 mm
- Format: Roll, pad, strip, gasket
- Width: 10 mm-500 mm or slit to size
- Processing: Slitting, die cutting, kiss cutting
-
- Common sizes: 3 mm-1240 mm width, roll or slit roll
- Color: Translucent white or light yellow
- Carrier: Thin non-woven tissue paper
- Liner: White release paper or yellow glassine liner
- Thickness: 70 um, 80 um, 90 um, 100 um
- Use: Paperboard, labels, display cards, gift boxes
-
- Width: 90 mm / 100 mm
- Length: 20 m / 50 m
- Color: Yellow, white, gold
- Adhesive: Heat activated hot melt
- Placement: Below carpet joint
- Use: Heat iron joining
-
- Width: 10 mm-50 mm
- Thickness: 1 mm-5 mm
- Color: Black, grey, custom
- Backing: Heat resistant fiber composite
- Adhesive: High temperature self adhesive backing
- Use Area: Lid edge, door gap, window edge
-
Double sided tape for artificial grass can support turf-to-turf seaming, patch repair, light perimeter support and temporary turf-to-floor fixing, but these jobs create different bond lines. Selection should start with the actual turf backing, substrate, exposure, traffic and removal requirement rather than hand tack alone. Main risks include visible joints, edge lift, contaminated or damp contact surfaces, movement before adequate contact develops and adhesive transfer during removal. Where the surface, coating or outdoor condition is uncertain, a representative sample seam should be tested before full use.
-
- Material: Closed-cell EVA foam
- Adhesive: Acrylic, rubber, or hot melt adhesive
- Color: Black, white, gray, or custom
- Thickness: 1 mm-15 mm typical range
- Width: 5 mm-1000 mm slit roll width
- Form: Rolls, strips, pads, die-cut gaskets
-
- Material: Closed-cell PE foam carrier
- Thickness: 0.5 mm-3.0 mm typical
- Density: 45-100 kg/m3 typical
- Color: White, black, gray optional
- Adhesive: Rubber, acrylic, solvent acrylic PSA
- Processing: Slitting, die-cutting, warm pressing, laminating
-
- Material: Closed-cell neoprene foam
- Color: Black as standard
- Adhesive: Rubber PSA or acrylic PSA
- Liner: Kraft paper or PE-coated release liner
- Thickness: 1 mm-20 mm common range
- Format: Slit rolls, die-cut gaskets, kiss-cut parts
