Double Coated Carpet Tape

Double Coated Carpet Tape from Both Side Tape Company is manufactured for commercial carpet hold-down in hotels, offices, exhibition halls, event venues, and other indoor flooring projects where the carpet must stay flat under walking traffic. As a factory manufacturer, we produce this tape with selectable carriers, adhesive systems, liners, and slit widths. Typical production ranges include 0.20-0.32 mm total thickness, +/-1 mm slit width tolerance, and 24-72h observation for shifting, edge lift, curling, and removal residue.

Product Video

Product Packaging

Product Overview

Double Coated Carpet Tape uses a carrier in the middle and pressure-sensitive adhesive on both sides. In commercial flooring work, this structure matters because the carrier is not just a support layer. It helps control stretching during installation, improves tear resistance, and keeps the tape more stable after the carpet is pressed into place. The adhesive layers bond the carpet backing to the floor surface, while the liner protects the adhesive during unwinding, cutting, positioning, and long-run application.

For hotels, offices, exhibition aisles, and temporary event floors, tape selection should not be based only on strong initial tack. A removable grade used for booth carpet may need fast grip during setup and cleaner removal after 24-72h. A stronger holding grade used in office walkways or hotel corridors should focus more on shear resistance, repeated foot-traffic stability, and edge-lift control. Carpet movement usually starts at seams, perimeter edges, aisle transitions, and corners, so these areas need more careful tape placement and pressure.

Both Side Tape Company can produce this commercial carpet tape with cloth or polyester fabric carriers when better conformability is needed on slightly uneven flooring. Film carriers are suitable where a flatter bond line and lower tape profile are preferred. Natural rubber adhesive is often chosen for quick placement and strong initial tack. Synthetic rubber or stronger holding systems are better for areas where the carpet must resist heavier walking load. Before larger use, the tape should be tested on the actual carpet backing and floor surface, because PVC flooring, concrete tile, painted floors, temporary panels, and different carpet backings may show different peel, residue, and adhesive transfer behavior.

Benefits

• Helps reduce carpet shifting by bonding both the carpet backing and the floor substrate.
• Double coated structure gives two-side contact while the carrier improves stretch and tear control.
• Removable and stronger holding grades can be selected according to event duration and traffic load.
• Blue PE liner improves visibility during large-area application and helps installers remove the liner smoothly.
• Cloth and polyester fabric carriers improve handling on slightly textured commercial flooring.
• Film carrier options are suitable when a lower profile and flatter tape line are required.
• Typical 180-degree peel adhesion can be adjusted around 12-18 N/25 mm on stainless steel.
• Peel adhesion to commercial carpet backing is typically around 8-15 N/25 mm, depending on backing texture.
• Low-residue grades can be checked after 24-72h removal testing on the actual project surface.
• Slit roll width tolerance around +/-1 mm supports consistent use on seams, perimeters, and long flooring lines.

What carrier and adhesive structure should be selected for commercial carpet hold-down?

Carrier and adhesive selection should follow the carpet backing, floor condition, walking load, and removal plan. Cloth or polyester fabric carriers are practical when installers need better conformability, hand tear, and resistance to stretching during placement. Film carriers are a better choice when the project needs a thinner profile under the carpet. For adhesive selection, natural rubber supports fast tack for exhibition flooring and temporary carpet positioning, while synthetic rubber or stronger holding grades are better for hotel, office, and commercial carpet areas with repeated foot traffic. Practical comparison should include 180-degree peel adhesion, static shear holding, liner release force, edge-lift observation, and residue after removal.

TDS

Product Production

Applications

• Commercial carpet hold-down in hotels, offices, showrooms, corridors, and public walking areas.
• Exhibition carpet fixing for booths, aisles, stages, temporary flooring, and trade show setup.
• Carpet seam positioning where edge curling, lateral movement, and lifting need better control.
• Temporary event flooring where clean removal and residue observation are required after use.
• Office flooring projects around walkways, display rooms, training spaces, and renovation areas.
• Hotel carpet installation support for banquet rooms, conference halls, and high-use event spaces.
• Commercial carpet edge fixing around wall lines, transitions, booth borders, corners, and stress points.

How does double coated carpet tape reduce shifting, edge lift, and foot-traffic movement?

Double coated carpet tape works best when both adhesive layers fully wet out against the carpet backing and the floor substrate. Firm installation pressure is important because weak contact points may later become curling, adhesive transfer, or edge lift. In high-traffic areas, tape should be applied at seams, perimeters, aisle transitions, and corners where repeated walking force is concentrated. During sample validation, check carpet shifting, edge curling, liner removal, adhesive transfer, and residue after 24-72h. This gives flooring teams a more reliable result than judging the tape only by first-touch tack.

Loading Container

FAQ

1. Is this tape mainly for household rug use?

No. It is designed for commercial carpet, hotel, office, exhibition, and trade show flooring work.

2. Can the adhesive strength be adjusted?

Yes. Removable, medium holding, and stronger holding grades can be selected according to traffic load and removal needs.

3. Will it leave residue after removal?

Low-residue grades are available, but residue should be tested on the actual floor surface before larger use.

4. Can widths and liners be customized?

Yes. Slit width, roll length, carrier, adhesive, and liner type can be matched to commercial flooring requirements.