Both Side Tape Company is a manufacturer of Double Sided Carpet Tape for carpet fixing, rug edge control, carpet seam joining, and artificial grass seaming. This category is built for flooring contractors, event teams, hotel and office renovation projects, turf installers, and bulk supply programs that need more than one standard roll. Products can be matched by backing material, adhesive strength, floor condition, removal requirement, use period, and installation method.
Showing all 4 results
Double Sided Carpet Tape is a flooring-focused category, not a general double-sided mounting tape range. The products in this category are used when carpet, rug, floor covering, or turf backing needs to be fixed, held flat, or joined during installation.
For temporary carpet work, the main concerns are fast tack, easy handling, clean removal, and residue control after a defined use period. For commercial carpet fixing, stronger shear holding and edge lifting resistance may be more important, especially in walkways and office areas. Rug corner fixing needs a thinner, lower-profile tape so the rug edge does not look raised after pressing.
Product Series | Covered Products | Main Use | Practical Selection Point |
Commercial Carpet Hold-Down Tape | Double coated cloth tape, exhibition carpet tape, carpet hold down tape | Temporary or stronger carpet fixing on commercial floors | Check use time, traffic level, floor coating, edge lifting, and residue after removal |
Rug Corner Fixing Tape | Low-profile rug tape, anti-curl corner tape, thin removable rug fixing tape | Small-area rug edge and corner control | Keep the tape thin enough to avoid visible corner bumps |
Heat Bond Carpet Seam Tape | Professional carpet seam tape, heat bond carpet tape, hot melt seaming tape | Joining carpet backing with seaming iron heat | Confirm hot melt amount, scrim strength, seam width, and backing penetration |
Artificial Grass Seam Tape | Synthetic grass adhesive tape, self-adhesive turf joining tape, non-woven turf seam tape | Back-side seam bonding for synthetic grass rolls | Check turf backing contact, seam gap control, moisture resistance, and edge lifting |
Material / Adhesive Type | Best Fit | Practical Advantage | Common Misselection Risk |
Woven cloth + natural rubber PSA | Exhibition carpet, temporary flooring, commercial carpet fixing | Strong initial tack, hand tearable, good contact with rough floor surfaces | May be too aggressive for coated wood or painted floors without sample dwell test |
Cotton-polyester cloth + synthetic rubber PSA | Office carpet positioning, hotel walkway fixing, longer hold-down use | Better shear holding and stable bonding feel | Residue may increase if use time, pressure, or temperature exceeds the tested range |
Thin carrier + removable adhesive | Rug corner fixing and anti-curl control | Low-profile appearance and easier lifting from selected hard floors | Not suitable for large carpet areas, rolling loads, or long-term commercial fixing |
Reinforced scrim or paper backing + hot melt adhesive | Heat bond carpet seam joining | Works with seaming iron for carpet backing connection | Wrong choice if used as pressure-sensitive floor hold-down tape |
Non-woven backing + hot melt PSA | Artificial grass seaming and synthetic turf installation | Better turf backing contact and outdoor seam support | Not ideal for removable indoor carpet hold-down applications |
Different flooring jobs need different tape structures, so Double Sided Carpet Tape should be selected by installation purpose rather than by roll size alone. For exhibition carpet, event flooring, office carpet positioning, and hotel walkway fixing, a cloth carrier carpet hold down tape with rubber pressure-sensitive adhesive is usually selected for fast tack, hand tearability, and better contact with slightly rough floor surfaces.
Item | Typical Range / Customizable Value |
Product coverage | Pressure-sensitive carpet fixing grades, low-profile rug fixing grades, heat-activated carpet seam grades, artificial grass seam joining grades |
Carrier options | Woven cloth, cotton cloth, cotton-polyester cloth, reinforced scrim, paper backing, non-woven fabric |
Adhesive options | Natural rubber PSA, synthetic rubber PSA, hot melt PSA, heat-activated hot melt adhesive |
Adhesion grade | Removable grade, low residue grade, strong hold grade, heat bond seam grade, turf seam grade |
Total thickness | 120-450 um for pressure-sensitive grades, heat bond grades confirmed by backing and adhesive bead structure |
Standard width | 24-150 mm finished rolls, 4-1050 mm slit-to-order range, 100-150 mm common turf seam range |
Standard length | 5 m, 10 m, 20 m, 25 m, 30 m, 50 m, 100 m, or jumbo roll converting length |
Peel adhesion reference | 8-25 N/25 mm depending on adhesive grade and test surface |
Tensile strength reference | 20-45 lbs/in or 3-8 kN/m depending on carrier structure |
Service temperature reference | 5 C-70 C for indoor pressure-sensitive grades, outdoor grades confirmed after sample testing |
Liner options | Blue PE liner, white PE film release liner, LDPE film liner, release paper |
Floor compatibility test | Tile, sealed wood, vinyl, marble, concrete, painted floor, carpet backing, turf backing |
Sample validation | 24-72 h sample dwell test, residue observation, edge lifting check, adhesive transfer check, removal angle check |
| |
|
|
Both Side Tape Company can adjust this Double Sided Carpet Tape category by width, length, thickness, adhesive system, carrier, liner, and roll format. For carpet hold down tape, common confirmation details include adhesive strength, hand tearability, liner release, residue performance, and floor surface condition.
Floor compatibility is one of the most important checks before choosing Double Sided Carpet Tape in bulk. The same adhesive may behave differently on sealed wood, ceramic tile, marble, vinyl, painted stage floors, concrete, carpet backing, or synthetic turf backing. For temporary carpet fixing, customers normally compare initial tack, edge lifting after foot traffic, and residue observation after removal.
No. Heat bond carpet tape is used for carpet seam joining with a seaming iron. Pressure-sensitive carpet hold down tape is used for carpet hold-down, rug fixing, or temporary floor covering placement.
Low-residue grades can be selected, but residue after removal depends on floor coating, dwell time, pressure, temperature, adhesive grade, and removal angle. A sample dwell test is recommended before bulk use.
A cloth carrier carpet hold down tape with rubber PSA, easy release liner, hand tearability, and tested low-residue removal is usually suitable for exhibition booths, event halls, and temporary flooring.
Usually no. Artificial grass seams need a turf-focused backing, such as non-woven seam tape or synthetic grass adhesive tape, with outdoor exposure resistance and proper contact with turf backing.
